Rees, Inc. 04944-000 Emergency Stop Switch

Function/Application The following switch in the slack cable style has a positive disconnect feature. This makes the manual reset method particularly suitable for emergency stop applications as well as general circuit control. They are available in manual and automatic reset configurations. The housing is made of high-quality die-cast aluminum and coated with dry powder paint. The white powder coating is TGIC polyester,contains no residual heavy metals,and contains no lead or reactive substances that may be considered food unsafe. 4X indoor models have stainless steel cover screws and shafts. Each external terminal will accept (2) 14 AWG stranded wire with gold plated contacts to eliminate high resistance discoloration. Units without +NC contact arrangement are equipped with two 1/2 NPT conduit openings. Units with 2 NO+2 NC contact arrangements are equipped with two 3/4NPT openings. Recommended maximum cable length is 200 feet,with maximum spacing of supports of 10 feet. The mechanical life of these devices is 150,000 operations. These switches can be found on automatic transfer machines and various conveyor units. Their rugged construction and long-term reliability make these cable switches ideal for use in a variety of industrial environments. Electrical Ratings - A600/N300 Listed under UL 508 - File Listed under CSA C22.2 - File 3648 - Meets IEC/EN 60947-5-1 Third Party Certification DEMKO File FI-17205 Ambient Temperature Range Operation: + 32°F to +131°F (0°C to +55°C) Storage: -40°F to +185°F (-40°C to +85°C) Note: 0°C operating temperature is based There is no freezing of moisture and liquids. These switches come with standard fiberflex cover gaskets. For added protection against corrosive environments,a replacement neoprene gasket can be ordered by requesting part number 02005-540. Contact components are not field replaceable