Shuide Technology 23.575 Microplastic Sampling and Processing

Danish KC-Denmark company microplastic sampling pump

Category: Microplastic Particle Sampler
Model: 23.575
Keywords: microplastic sampling pump,marine microplastics,microplastic particles
Supplier: Technology Co.,Ltd.

Product introduction:

The microplastic sampling pump was originally developed by the Danish company KC-Denmark on the basis of participating in the EU project "Clean Ocean". The device was originally designed to be able to carry out very precise measurements of plastic particles in oceans and lakes.

KC-Denmark Company of Denmark - Microplastic Sampling Pump

KC-Denmark's microplastic sampling pump was originally developed based on KC-Denmark's participation in the EU project "Clean Ocean". The device was originally designed to detect plastic particles in oceans and lakes. Take very precise measurements.

In a sewer sampling,the Danish KC microplastic sampling pump can use three filter plates with different mesh sizes to sample,and at the same time,it can accurately measure the pump water volume. Microplastic sampling pump installed in 316Inside the stainless steel frame,the frame mainly protects the engine and pump. The pump is mounted vertically on the frame with the motor facing upwards. 3 types of filter plates are used to collect microplastic particles,with 3 standard mesh sizes of 100μm,300μm and 500μm. Thanks to its very flexible filter plate mesh range (mesh sizes from 20 μm to 1000 μm),KC-Denmark’s microplastic sampling pump has proven to be a very effective tool in plastic sampling of marine and lake waters. .

The Microplastic Sampling Pump’s on-board computer allows users to program it to collect the precise amount of water they want to take,ensuring the data is extremely precise and scientifically sound.The sample by the pump is compared. This is mainly because the pumped water is measured after passing through the filter plate,preventing erroneous data caused by any organic material blocking the sample area of the filter plate.

Figure 3 is a closed operation box. The sampling pump is equipped with a PLC controller and a touch screen,which makes it easier to understand the current working status of the sampling pump and also makes it easier to edit the program of the sampling pump.

Figure 4 - The standard delivery of filter plates includes coarse filter plates and 500μm,300μm and 100μm filter plates. Other mesh sizes can be customized,up to four filter plates.

IMPORTANT

Note: Always clean the pump with clean water after use.

Technical Parameters:

More keywords:Microplastic sampling pump,marine microplastics,microplastic particles,marine microplastic sampling