ContiTech Inertial Measurement Unit for ESC Inertial Measurement Unit (IMU)
The quotes are provided by Several Partner Companies
- Prices： Request for a Quote for Further Details
- Model ： Inertial Measurement Unit for ESC
- Category： Inertial Measurement Unit (imu)
- Brand ： ContiTech
- Delivery Time： Request for a Quote for Further Details
- Manufacturer： ContiTech
Products
The sensor cluster provides all control units in the vehicle with the vehicle’s current movement status (yaw rate,longitudinal and lateral acceleration and,optionally,pitch and roll rates) in the form of electronic signals.The verified signals are transmitted to the data bus via a standardized interface,which can also be adjusted on a customer-specific basis. In complex control algorithms,these signals are used to initiate vehicle stabilization when ESC control is activated.The signals are also needed for driver assistance systems.","Benefits and Features","Technical Data
characteristic.
- Cost and size optimized sensor clusters.
- using combo ii and an asic.
- Improved SC06 shell,height 30mm.
- Maximum customer compatibility.
- Failure flags stored in E²PROM
- HSA (hill start assist) performance of accelerometer.
- Improved robustness and product quality.
- Sensing Range - Yaw Rate: ± 100 °/s,Acceleration: ± 20 m/s²
- Supply voltage: 7.7V...16 volts (ecu).
- Temperature Range: -40 °C to +85 °C
- Output type: can protocol (vda).
- Connector interface: 4-pin (MQS).
- Installation size: 57.4 mm (optional.90.4mm).
- Lead-free: yes.
- Dimensions: 42 x 30 x 80 mm.
- Improved sc06 shell,height 30mm.
