Kacise KUS630 liquid level sensor
The quotes are provided by Several Partner Companies
- Prices： Request for a Quote for Further Details
- Model ： KUS630
- Category： Liquid Level Sensors
- Brand ： Kacise
- Delivery Time： Request for a Quote for Further Details
- Manufacturer： Kacise
Products
KUS630Series ultrasonic liquid level meter
version number | Version description | author | time |
V0.1 | initial version | Jun | 2018Year5moon |
V0.2 | Correct the error and add the line sequence description of the switching output | Jun | 2020Year9moon |
V0.4 | IncreasetypeB、Type CProbe adaptation30Mihe50Meter range requirements | Jun | 2022Year4moon |
1.Features
lhigh sensitivity
lFully sealed
lIP68Protection level
lCorrosion-resistant housing for corrosive and applications
2.Dimensions
Unit ismm.
Type A
Type B
TypeC
3.Electrical connections and signal definitions
color | Line order | definition |
red | 1 | Power supply positive |
black | 2 | Power return ground |
yellow | 3 | Analog output,voltage output,current output switching output(Low power version left floating) |
blue | 4 | RS485A+oruart TXD |
green | 5 | RS485B-oruart RXD |
Cable color | Line order | describe | Remark |
red | 1 | powered by | 3.3V-30VWide voltage input |
black | 2 | GND | |
yellow | 3 | Switchoutput | Switch terminals,load capacity1A 60V,supports up to two switch outputs with independent logic. The two terminals are the two contacts of the switch. The positive and negative poles are not distinguished and can be connected at will. |
White | 4 | Switchoutput | |
brown | 4 | RS485A+ | |
green | 5 | RS485B- |
4.Parameter Description
model:KUS630 | |
Measuring range | 600...12000mm or1.2rice….30rice or1.8rice….50rice |
blind spot | 0...600mm（600mmIt is an unstable working area and it is not recommended to work in this range); the minimum can be done300mmBlind zone version,needs to be customized. |
Supply voltage | 3.3...24 VDC,ripple10 %SS |
Working current | ≤45mA(fastest measurement speed) Low power version,sleep power consumption is less than0.3mA,power consumption20mA(less than2ms),the receiving power consumption is not greater than8mA(less than150ms） |
output signal | 1Programmable analog output0-10V. 2 RS485 output. 3UartSerial port output 44-20mAoutput 5：Switch output |
measurement accuracy | ≤1% |
Temperature compensation | yes |
working conditions
Working temperature | -25…70℃(248...343K) |
Storage temperature | -40…85℃(233...358K) |
other instructions
Electrical connections | 5-wire cable |
Protection level | IP68 |
shell material | PVC /PVDF/PTFE(defaultPVC） |
5.Sensor function
Analog quantity
The analog output can beRS485For setting,the sensor can work in8The specific reference for medium mode is as follows:
No.1step,through the serial port debugging assistant ormodusDebugging assistant,etc. are connected to the host computer.
No.2Step 1,set a near point reference distance point.
No.3step,set a far point reference point
No.4Step 1,set the output voltage or current of the near-point reference point.
No.5Step 1,set the output voltage or current of the remote reference point.
No.6Step 1: Set the analog output to switch characteristic selection.
No.7Step 1,set the analog output as linear output or switch output option.
No.8Step,reset the sensor to make the new parameters take effect.
sensor8a working mode.
1:Open window mode by default
2: Close window mode by default
3: Open single point mode by default
4:Single point mode is turned off by default
5: Single-point hysteresis mode is enabled by default.
6: Single point hysteresis mode is turned off by default
7: Turn on detection mode by default
8: The presence or absence detection mode is turned off by default.
485Output Data
485The output data isMODBUS-RTUFormat. Please refer to the software instruction manual for details.
6. Example of serial port setting output form
7.Ordering information
KUS | model | output | Measuring range | describe |
630A | Product series model and shape,default delivery isTypeA,support customization | |||
630B | ||||
630C | ||||
custom made | ||||
0-10V | Analog quantity0-10Voutput | |||
0-5V | Analog quantity0-5Voutput | |||
0-3V | Analog quantity0-3.0Voutput | |||
4-20mA | Analog quantity4-20mAoutput | |||
SW | Switching output | |||
Uart | UartSerial port outputMODBUS RTUprotocol | |||
RS485 | RS485outputMODBUS RTUprotocol | |||
XXX mm | XXX mmmeans the maximum measuring distance (default1000mm） | |||
KUS | 550 | RS485 | 10000mm | |
