Process Technology LC Series Material Level Controller

characteristic

• feature
• specification
• Available options (consult factory)
• Helps prevent fire and tank damage in low-level conditions.
• Dual probe device (lc2): for single point control. Multi-probe unit (lc3): for two-point control and filling/pumping applications.
• Fluoropolymer (PTFE) covered: 316 stainless steel,titanium,Hastelloy C® and graphite tipped Hastelloy probe materials.
• Control enclosure: gasketed ul type 1,ip21 (indoor) polypropylene box with stainless steel hardware.
• Probe Housing: Vapor-resistant polypropylene tip with 10 ft (3 m) flexible lead and quick-connect plug for easy connection to remote circuits.
• Certification: complies with culus and ce standards.
• Relay Ratings: 10 Amp,120/208 to 240 Volts,50/60 Hz,Single Pole,Double Throw.
• Sensing output: 14.5 VAC.
• Ambient temperature range: 0°F (-18°C) to 104°F (40°C).
• Maximum solution resistance: 70,000 ohm-cm.
• Ground on the circuit board.
• Probe length should not exceed 20 feet (6 meters).
• Can be pre-wired into a combination control.
• 4,5 or 6 probe units for multi-level control applications.
• Specification
• Certifications: cULus and CE compliant.
• Induction output: 14.5 vac.
• Probe lengths up to 20 feet (6 meters).

Provides automatic control and consistent liquid levels for most water treatment processes and waste treatment tanks,or when leak detection is required.