Hebei Longyuntong Longyuntong pipeline wind speed sensor environmental monitoring

Pipe Wind Speed Sensor The wind speed sensor housing is made of high temperature resistant and anti-corrosion material. The sensor is based on the heat dissipation or Pitot tube principle and requires very little air volume. Even in harsh environments,the performance is stable and reliable; compared with other traditional wind speed sensors,it can obtain more Good stability can ensure faster and accurate micro-air volume measurement and accuracy. It has a wide range ratio and the detection data is accurately calibrated across the full range through the internal microcontroller. Both linear compensation and temperature compensation are realized digitally,so the accuracy and High resolution; no zero drift and long-term stability make it more cost-effective. In addition,this series of sensors can withstand transient high wind speeds and high wind pressures.

Features of Pipe Wind Speed Sensor

(1) This sensor has a compact design and high measurement accuracy.

(2) Fast response and good interchangeability.

(3) Both linear compensation and temperature compensation are realized digitally.

(4) No zero drift and long-term stability,making it more cost-effective.

(5) High data transmission efficiency and reliable performance to ensure normal operation.

Technical Parameters

Measuring range: 0～10m/s (other ranges can also be customized)

Accuracy: 0.2%FS

Resolution: 0.05m/s

Output signal: A: 0~10V DC

B：4～20mA

C: Non-standard 0～5V,RS485

Power supply: 13～24VAC (DC)

Frequency: 50Hz

Working environment: Temperature: -5℃～70℃; Humidity: 0～90%RH,no condensation

Probe length: standard 220mm (customizable length below 1500mm or non-standard length below 5000mm)

Connection terminal: 3X1.5²mm

Terminal; screw tightening

cable length:BVVR0.5mm²Allow70m BVVR1mm²Allow200m BVVR1.5mm²Allow300m