Jiajie negative pressure station exhaust outlet disinfection and sterilization device filtration equipment

Disinfection and sterilization of the exhaust port of the negative pressure station Device

Our company's products are original replacement parts. Other brands involved in our company have no brand significance and are only used as product model reference and customer selection comparison.

has long been producing food-grade stainless steel filters. The products have been tested and certified by third parties. The filter elements and filter materials produced by the company have been tested and certified by third parties in accordance with FDA standards. Each micron and the number of particulate matter have been tested and certified by third parties. Dust removal,The oil,water and sterilization effects have been tested and certified by third parties. provides GMP certified and AIB certified materials for stainless steel filters to help companies successfully pass the production certification assessment.

negative The installation sequence of the pressure sterilization system: air inlet pipeline---sewage tank--vacuum tank--3. Stainless steel negative pressure sterilization filter (it is best to add one in front of each vacuum pump to facilitate maintenance such as filter element replacement. If it is only in the main pipe When adding one,please be sure to install a bypass and reserve an access port for steam or disinfectant at the air outlet) - 4. Vacuum pump - (water ring aerated water separator) 5. Stainless steel exhaust port sterilization and filtration Filter---Outdoor roof discharge (away from other suction equipment to facilitate the diffusion of exhaust gas. The outer casing must be made of 304 stainless steel and there are no sanitary dead corners that breed bacteria. It must not be replaced by aluminum alloy or carbon steel; the entire filter must be able to withstand high temperatures Steam sterilization. (Aluminum alloy and carbon steel will oxidize and corrode. The filter element must use hydrophobic polytetrafluoroethylene (PTFE membrane) sterilizing filter material (0.01 micron),and it must pass integrity testing to effectively intercept bacteria and viruses. It cannot be used Borosilicate fiber,etc. (used for general industrial condensation of oil and water.

Cannot make bubble points and cannot filter bacteria and viruses. The multi-layered structure will instead form a breeding ground for microorganisms.) The entire filter must be able to be steamed and pass third-party testing of bacterial filtration efficiency; the sterilization effect is guaranteed. The shell and filter element materials must pass food-grade third-party testing Tested to meet FDA requirements: no secondary pollution and toxic substances are produced. 3. The filter element filter material has passed the bubble point test and passed the PTFE sterilizing filter,which is free from microbial challenges. 5. The designated infectious disease letter refers to the P brand purchased and the sterilization plan adopted; there are dozens of successful cases of use across the country! During the working process of the filter,the fully enclosed,negative pressure sterilization filter mainly uses a large-area sterilization filter element with a quick-installation structure. The filtration precision is 0.01μ. It is sterilized regularly using 121°C clean steam and can remove 99.995% of bacteria. and various bacteriophages. It is an important link in the medical center attraction system industry. Sterilizing filters are ideal for negative pressure air sterilization.