PCE Instruments PCE-TC 32 Camera

With increasing energy costs,building thermal imaging cameras are an essential measuring instrument for diagnosing leaks. Therefore,this building thermal imaging camera is considered an important diagnostic tool by energy consultants. On the front of the building thermal imaging camera are a light and a laser. The laser helps you see the measurement surface you want to test. Lamps are used to produce clear,realistic images in dark environments. A bright white LED serves as the light source.,the building thermal imaging camera can be used almost continuously for more than 9 hours. The service life is achieved because the architectural thermal imaging camera is equipped with two rechargeable batteries,each with a run time of 4.5 hours. Long-term observations are also possible. This can be supported by a tripod by placing a protective plastic and rubber cover over the building thermal camera. Below is a wire that allows the installation of such a tripod. This method is recommended if an area needs to be monitored by a thermal camera for a period of time. These records are stored on a MicroSD card. In particular,the display capabilities of architectural thermal imaging cameras are very wide,and it can display images as real images,infrared images,picture-in-picture or thermal image combinations. In addition to this,it is possible to switch between different colored trays in infrared mode. These colors include iron,iridescence,grey,gray,sepia,bluish-red,hot and cold,and damp. In this way,different diagnoses can be made during building monitoring. Thermal bridges are easy to find by using a building thermal imaging camera. This way energy waste can be predetermined. Therefore,increased heating costs can also be minimized. Thermal bridging may also lead to the formation of condensation water,which can lead to mold damage.,the protective cover made of rubber not only increases the grip,but also protects the device. In addition,there is a small sun protection device on the upper side of the display so that possible sun exposure does not affect the readability of the display. The menu can be operated directly via the touch-sensitive LCD display. In this way,various settings of the building thermal imaging camera can be performed. The front-mounted lights can also be switched on via the menu. This way the camera can also be used in dark environments. In addition,picture settings can be completed by simply operating the LCD.