Euchner RPS emergency stop switch

characteristic

• Rope installation is quick and easy
• 4 contacts (2 safety contacts and 2 alarm contacts)
• Cable lengths up to 246 feet
• 3 cable entries
• version and leadership
• Built-in clamp
• Tension adjustment knob
• Window cord
• Integrated design with few accessories
• Narrow shell version (40mm)
• Metal case version - pull to reset
• Integrated emergency stop
• simple torsional reset
• Prewired plug
• Suitable for extruded aluminum protection (30 mm installation)
• Reinforced thermoplastic housing
• Die-cast aluminum housing
• Environmentally friendly IP67-oil,dustproof and waterproof
• Ambient operating temperature -20 to 80 degrees Celsius
• Three cable length versions
• Silver alloy,gold flashover
• 0-82 feet (rps..100)
• 82-123 feet (rps..175)
• 123 - 246 feet (rps. 300)
• Quick and easy rope installation
• Environmentally friendly IP67-oil-proof,dust-proof,and waterproof
• Silver alloy,gold flash contacts

Compared to the Estop button,the EUCHNER rope pull switch (RPS switch) provides protection over a large area. Operation is possible along the entire length of the rope,not just the small area within reach of the switch. The RPS switch is triggered by increasing (pulling) or decreasing (cutting off) the safety cable tension or by pushing the emergency stop switch through redundant safety and monitoring contacts. When proper rope tension is present,the RPS switch is reset by twisting the reset knob. The RPS rope pull switch is then ready for operation. The RPS makes installation quick and easy with a built-in tension adjustment knob and rope tension indicator window.,Note: \n RPS switch mounting screws should be M5x45 or RPS-M switch mounting screws should be M6x35 or