Siemens SITRANS P300 pressure transmitter

Overview,SITRANS P300 is a digital pressure transmitter for relative and absolute pressure. A conventional threaded version is available as a process connection,as well as a flush-mounted version. A wide range of flush-mounted versions are suitable for food and pharmaceutical applications and meet EHEDG and 3A hygiene requirements.,the output signal is a load-independent DC current from 4 to 20 mA or a PROFIBUS PA or FOUNDATION fieldbus signal that is linearly proportional to the input pressure. Communication via HART protocol or PROFIBUS PA or FOUNDATION fieldbus interface. Basic settings of the pressure transmitter can be easily performed on site using three buttons.,SITRANS P300 has a single chamber stainless steel housing. The pressure transmitter is approved for intrinsically safe protection. Can be used in Zone 1 or Zone 0.,Advantages,Applications,Pressure transmitters are available in both gauge and absolute pressure versions. The output signal is always a load-independent DC current of 4 to 20 mA or a PROFIBUS PA or FOUNDATION fieldbus signal,which is linearly proportional to the input pressure. Pressure transmitters measure corrosive,non-corrosive and hazardous gases,as well as vapors and liquids.,it can be used for the following measurement types:,with appropriate parameter settings it can also be used for the following additional measurement types:,the intrinsically safe type EEx transmitter can be installed in hazardous areas (Zone 1). The transmitter has an EC type examination certificate and complies with the corresponding ATEX European harmonized standards. Gauge pressure,this variable measures corrosive,non-corrosive and hazardous gases,vapors and liquids.,the minimum range is 0.01 bar (0.15 psi),the maximum range is 400 bar (5802 psi).,liquid level,with appropriate parameter settings,the gauge pressure variable can measure the level of corrosive,non-corrosive and hazardous liquids.,measuring the liquid level in an open container requires one device; measuring the liquid level in a closed container requires two devices and a process control system.,absolute pressure,this variable measures the absolute pressure of corrosive,non-corrosive and hazardous gases,vapors and liquids. Minimum range is 0.008 bar a (0.12 psia),maximum range is 30 bar a (435 psia)

Features

• High quality and service life
• High reliability even under extreme chemical and mechanical loads
• Extensive diagnostic and simulation capabilities
• Minimum consistency error
• Small long-term drift
li>
• Wetted parts made of high-grade materials (such as stainless steel,Hastelloy)
• Measuring range 0.008 bar to 400 bar (0.1 psi to 5802 psi)
• High measurement accuracy
• Use control keys and Parameterization with HART and/or PROFIBUS PA or FOUNDATION fieldbus
• Gage pressure
• Absolute pressure
• Level
• Volume
• Mass
• High quality,service life
• Measuring range: 008.0 bar to 580 bar
• Parameterization via control keys and HART and/or PROFIBUS PA or FOUNDATION fieldbus
• Volume