Stark Electronics ST-GZ01 light sensor intelligent hardware (data collector, sensor)
- Prices: Request for a Quote for Further Details
- Model : ST-GZ01 light sensor
- Category: Light Sensors
- Brand : Stark Electronics
- Delivery Time: Request for a Quote for Further Details
- Manufacturer: Stark Electronics
Products
The ST-GZ01 light sensor uses a highly integrated light sensor chip with a full-range calibrated digital output.
It has the characteristics of wide measurement range,good linearity,good waterproof performance,easy use,easy installation,long transmission distance,etc. It is suitable for various places,especially suitable for agricultural greenhouses,urban lighting,building control and other places.
*High measurement accuracy
*Low power consumption,energy saving and safe
* Reasonable structural design and in line with scientific research requirements
*Low failure rate,mature technology,stable performance
parameter | Voltage type | Current type | RS485 type |
powered by | 7-24V | 10-24V | 7-24V |
output signal | 0.4-2v | 4-20mA | RS485 communication |
formula | Light value (KLux) = (output voltage value-0.4V)/1.6*range | Light value (KLux) = (output current value-4ma)/16*range | Modbus protocol |
Measuring range | 0~150kLux | measurement accuracy | ±5% |
resolution | 0.1kLux | Maximum power consumption | <35mA |
Response time | <1 second | stable schedule | 1 second after power on |
Equipment List:
1 sensor
1 sensor lead
One copy each of certificate,warranty card and wiring instructions
model | Aerial Insertion Instructions | Thread color description |
Voltage output type | 1(V+): power supply positive 2(G): Power ground 3(Vo): Output voltage signal 4 empty | Brown (V+): Power positive Yellow (G): Power ground Blue (Vo): Output voltage signal |
Current output type | 1(V+): power supply positive 2(G): Power ground 3(Vo): Output current signal 4 empty | Brown (V+): Power positive Yellow (G): Power ground Blue (Vo): Output current signal |
RS485 interface type Modbus protocol | 1(V+): power supply positive 2(G): Power ground 3(T+): RS485+/A/T+ 4(T-): RS485-/B/T- | Red (V+): Power supply positive Black (G): Power ground Yellow (T+): RS485+/A/T+ Green (T-): RS485-/B/T- |
Download
ST-GZ01 light sensor manual |
178.27 KB | Click to Download |