Audio Precision SWR-2755 Audio Switch Matrix
- Prices: Request for a Quote for Further Details
- Model : SWR-2755
- Category: Audio Switch Matrix
- Brand : Audio Precision
- Delivery Time: Request for a Quote for Further Details
- Manufacturer: Audio Precision
Products
characteristic
- Input and output configurations switch generator output or analyzer input,or both.
- Balanced and unbalanced configurations are available.
- The LED displays the on or off status of each channel.
- Multiple switches can be connected to a single audio precision analyzer,exp system capacity to up to 192 inputs and outputs.
- Low inter-channel crosstalk,less than –150 dB at 20 kHz in the balanced configurations.
- All switches are one rack unit (RU) high (1.75). The switch can be used on a bench or in a rack,with an optional rack mount adapter kit.
- Maximum rated voltage 200 Vpk,160 Vrms
- Maximum signal power 5w or 200ma
- crosstalk
- Series resistance is generally less than 0.3 ohms per side
- The shunt capacitance is typically<90 pF from signal path to chassis (100 nF from BNC case to chassis on U version).
- Reverse terminated 604 ohms,250mw max
- Balanced 600 ohm load –136 dB 100 kHz
- Unbalanced 600 ohm load
- Power Requirements 90–250 Vac,50-60 Hz,via external dc supply module
- Temperature Range Operating 0°C to +50°C Storage –40°C to +75°C
- Humidity 80% RH to +40°C,(non-condensing)
- Dimensions 16.5 x 1.75 x 10.5 inches [41.9 x 4.4 x 26.7 cm]
- Approximately 9.9 lbs [4.5 kg]
- Regulatory Compliance
- EMC complies with FCC Part 15 Part J (Class B),89/336/EEC,92/31/EEC and 93/68/EEC,EN 50081-1(1992) Emissions Class B,EN-50082-1(1992) exemption.
- Safety complies with 73/23/EEC,93/68/EEC,EN6010-1 (1903)—IEC 1010-1 (1990) + Amendment 1 (1992) + Amendment 2 (1995). Installation category II—Pollution Degree 2.
- External power supply AP part number 4540.0020 complies with IEC 60950:1991+A1+A2+A3+A4,UL 950 third edition E183744,CSA C22.2 No. 950.
- External power supply AP part number 4540.0051 complies with IEC 60950:1991,UL60950 third edition E199447,CSA C22.2 No.,PSE J60950:1998,nomo-001-scfi-1993.
- 12×2 configuration
- the two generator output channels (A and B) to any of the 12 channels
- Up to 16 units be cascaded,allowing up to 192 channels to be accessed
- XLR connector for balanced signals,or use adapter for unbalanced signals
- Supplementary mode allows all but one channel to be driven while measuring undriven channels for worse crosstalk on multi-channel devices
- any two analyzer input channels (A and B) from any of the 12 channels
- be used as input or output switch (via dip switch on rear panel)
- Floating BNC connector for unbalanced signals prevents ground loops
Audio Precision offers three models of SWRR-2755 audio switchers that expand the 2-channel input and output capabilities of the Audio Precision 2700 Series and ATS-2 audio analyzers,as well as older System One and System Two instruments. The new switches are fully compatible with our existing products and offer better performance at a lower price. They can also be used with any discontinued product,originally designated SWRR-2122 or SWRR-122 switches. "With the same feature set and rugged integrity of the SWRR-2122,the new SWRR-2755 series brings significantly reduced string tone (18 dB better at unbalanced 600 Ω loads; 10 dB better at balanced 600 Ω loads),a new universal power supply that automatically adjusts to all line voltages,a convenient rear panel grounding lug and full EMC and Safety regulations. Key Features,Specifications,Electrical Characteristics,General Features,Options,SWR-2755M Output Switch,SWR-2755F Input Switch,SWR-2755U Unbalanced Switch.