OMEGA Engineering, Inc. OMEGA THX-400 Thermistor Temperature Probe

The THX-400-GP probe can be used with the HDX handle and is ideal for general immersion measurements in gases and liquids. The probe is constructed from a rugged 1/8 (3.1 mm) outside diameter 304 stainless steel sheath and is 12 (304 mm) for use in most process applications. Constructed with a high-precision thermistor element (2252 ohms +25C),providing 0.1C interchangeability over a temperature range of -40 to 100C (-40 to 212F). THX-400-AP is designed for HVAC applications. Small diameter sheathing and radiant energy shielding are easily installed over ductwork,gratings and vents. The probe will be used with the OMEGA HDX handle or can be permanently mounted using the OMEGALOK compression fitting. Constructed from a rugged 3/16" (4.8 mm) OD 304 stainless steel sheath,12" (304 mm) long,with a perforated tip to expose the thermistor bead to air flow for quick,accurate measurements. The precision thermistor element is rated to 100C (212F). The THX-400-NPsharp tip probe is used with the sturdy HDX handle. It easily penetrates soft and semi-frozen materials as well as soil and sand. Constructed with a rugged 1/8" (3.1mm) outside diameter 304 stainless steel sheath that is 12" (304mm) long. Uses high-precision thermistor element with 0.1C interchangeability and temperature range of -40 to 100C (-40 to 212F). Omega HDX handles are suitable for use with these quick disconnect probes. It must have an uncompensated OST connector and copper extension cord.