Tianxiang Measurement and Control TX51 Series Intelligent Single Flange Pressure Transmitter Intelligent Single Flange Pressure Transmitter
- Prices: Request for a Quote for Further Details
- Model : TX51 series intelligent single flange pressure transmitter
- Category: Pressure Converter
- Brand : Tianxiang Measurement and Control
- Delivery Time: Request for a Quote for Further Details
- Manufacturer: Tianxiang Measurement and Control
Products
Performance specifications
user target audience: Liquids,gases and vapors.
output signal:4~20mADC. (Intelligent overlayHARTprotocol digital signal).
Accuracy level: 0.2% (regular),0.075% (high accuracy)
Power supply:24VDC
burdenload:The maximum load resistance allowed by the load resistance loopRmax=(E-12)/0.02Ω。
Note:HARTThe communication requirement load is not less than250Ω,no higher than1100Ω
Range and zero position: Externally continuously adjustable.
Migration characteristics: Regardless of the output,after positive and negative transition,the upper and lower limits of the range must not exceed the range limit.
Ambient temperature range: General amplifier-29℃~+93℃; with on-site display-15℃~+70℃;
√△Pamplifier-29℃~+66℃; sensitive components work at-40℃~+104℃。
environment humidity:0~100%RH。storage temperature:-40℃~+100℃。
Overload pressure: Not exceeding the specified pressure1.15times,The transmitter will not be damaged.
Volume: less than0.16cm3。Start Time:2seconds,no preheating required.
Damping time:exist0.2~1.67Continuously adjustable within seconds,micro,low differential pressure and flange transmitters,the damping time is slightly larger.
Structural materials: ·Filling fluid: silicone oil or inert fluid
·Bolts: carbon steel chrome plated
·Electrical enclosure: low copper aluminum alloy
·Electrical enclosure surface coating: epoxy spray
·Drainage/Vent:316Stainless steel
·Isolation diaphragm:316LStainless steel,HastelloyC,Monel,tantalum
Pressure connector: ·The connecting screw hole on the pressure chamber is1/4-18NPT,the connecting screw hole of the pressure-inducing joint is1/2-14NPTinternal thread orM20×1.5-18External thread
·The screw hole of the amplifier cable connection hole isM20