Soway Xinwei Technology W131 water flow switch plastic material nylon plus glass fiber flow switch

describe:

The magnetic flow switch can monitor the flow status of the fluid in the pipeline and output the switching value. It is an important component in the fluid control system. When the flow rate in the pipeline is greater than the starting flow rate of the magnetic flow switch, the magnetic valve core moves in the direction of flow under the action of fluid pressure, triggering the reed switch contact action; when the flow rate drops below the starting flow rate, the magnetic valve core resets the magnet. It returns to its original position under the action of repulsive force, and the reed switch contact returns to its initial state.

Features:

● It adopts a magnetic piston valve core and uses the repulsive force of the permanent magnet to reset. It can be installed at any angle and avoids the problem of the spring return element catching debris;

●The shell is made of nylon and glass fiber, which has good mechanical properties and corrosion resistance;

● The reed switch is fixed and sealed with hot melt glue and epoxy resin, which is stable and reliable, waterproof and dustproof.

application:

● Air conditioning system

● Boiler equipment, etc.

● Pharmaceutical equipment

● Gas water heater

Technical specifications:

Electrical parameters:

Technical Parameters:

Dimensions:

Wiring method:

installation method:

The W131 magnetic flow switch is connected to the pipeline through the G1/2 external thread. During installation, the fluid flow direction must be consistent with the direction marked by the arrow on the housing. The two leads of the magnetic flow switch are connected to the application circuit, and the closing and opening of the reed switch contacts determines the on and off of the application circuit.

Note: The fluid flow direction must be consistent with the direction marked by the arrow on the shell.