Filter Criteria

Product Form

Measurement Technology

Acceleration Range

Angular Acceleration Range

Frequency Range

Resonant Frequency

Minimum Accuracy

±% Full Scale

Sensitivity

Sensor Output

Maximum Impact

Maximum Vibration

Operating Temperature

Feature

Sensor Installation

Filter Criteria

  • Kistler DTI5002A06

    Total of 1 Product Data

    Click to View
    DTI5002A06
    • Angular acceleration:-140 to 140 rad/sec²
    • Elevation:-1500 to 1500 g
    • The sensor output:Acceleration
    • Working temperature:32 to 104 F (0 to 40 C)
    • The biggest impact:4000 g
    • Sensors installed:Stud or Bolt-on
    • The product type:Sensor / Transducer
    • Product category:Accelerometers
  • Memsense MS-IMU3020

    Total of 3 Product Data

    Click to View
    MS-IMU3020
    • precision:0.30 ±% Full Scale
    • Measurement of shaft:Triaxial
    • Elevation:-15 to 15 g
    • Working temperature:-40 to 85 F (-40 to 29 C)
    • Sensors installed:Stud or Bolt-on
    • The product type:Sensor or Transducer; Transmitter
    • Product category:Accelerometers
  • LCA-100 Series
    • Characteristics of the:Environmentally / Hermetically Sealed
    • Working temperature:-67 to 185 F (-55 to 85 C)
    • The biggest impact:100 g
    • The product type:Sensor / Transducer
    • Product category:Accelerometers
    • Frequency range:60 Hz
  • ADI ADXL316WBCSZ

    Total of 7 Product Data

    Click to View
    ADXL316WBCSZ
    • RoHS:Y
    • The sensor type:3-axis
    • instructions:Accelerometer Low G XL Noise Cancellation
    • Life cycle:New products: the manufacturers of new products.
    • Maximum working temperature:+ 105 C
    • Minimum working temperature:- 40 C
    • Package / box:LFCSP-12
    • encapsulation:Tray
    • A series of:ADXL316
    • The sensitivity:57 mV/g
    • The trademark:Analog Devices
    • Install the style:SMD/SMT
    • Number of factory packaging:490
    • Power supply voltage is the largest:3.6 V
    • The power supply voltage - the smallest:1.8 V
    • The output type:Analog
    • subcategory:Sensors
    • The product type:Accelerometers
    • The qualification:AEC-Q100
    • Sensing axis:X, Y, Z
    • To speed up:16 g
  • 4111LN Single Axis MEMS Capacitive Low Noise IP67 3g
    • The sensitivity:10-2000 mV/g
    • Measurement of shaft:Single shaft
    • Frequency response range:0-2000 Hz
    • Characteristics of the:IP65 protection
    • The biggest impact:2000-5000 g
    • The product type:Sensors/sensor
    • The noise density:7-400 μg/√Hz
    • The amplitude of nonlinear:< 0.15 (typical) | < 0.5 (maximum) % FSO
    • The power supply voltage:6-40 V
    • The temperature coefficient of the scaling factor:PPM/K + 200 (maximum)
    • The temperature coefficient of deviation (maximum):±0.8-±160 mg/K
    • Working temperature:- 20 to + 125 ° C
    • The shell material:aluminum
    • Protection level:IP67
    • The weight of the:3 g
Filter Criteria

Filter Criteria

Product Form

Measurement Technology

Acceleration Range

Angular Acceleration Range

Frequency Range

Resonant Frequency

Minimum Accuracy

±% Full Scale

Sensitivity

Sensor Output

Maximum Impact

Maximum Vibration

Operating Temperature

Feature

Sensor Installation

}